Information Net for December 2

ARRL Helps Manufacturer to Resolve Arc Fault Circuit Interrupter RFI Problems

11/19/2013

Read by: MARTHA KJ4RIQ

The ARRL Lab has worked with a manufacturer of arc fault circuit interrupter (AFCI) breakers to resolve complaints that Amateur Radio RF was causing certain breaker models to trip unnecessarily. Like the more common ground fault circuit interrupter (GFCI), the AFCI is a safety device. Primarily designed to detect problems that could result in a fire, AFCIs detect potentially hazardous arc faults that result from often unseen damage or poor connections in wiring and in extension cords and cord sets.“Several months ago we started receiving reports from amateurs that when they transmitted, their AFCI breakers were tripping,” said Mike Gruber, W1MG, the ARRL Lab’s EMC specialist. He notes that the issue has been a topic of online ham radio discussions as well as on homeowner sites; it seems that stray RF is not the only thing that can cause a “nuisance trip” of an AFCI. Gruber pointed out that the National Electrical Code (NEC) already requires AFCIs in some household circuits, but not all US jurisdictions have adopted the requirement.Gruber said that as AFCIs became more common in new construction in the US, reports started coming in that AFCIs in the vicinity — not just in the radio amateur’s home — would trip in the presence of RF from an Amateur Radio transmitter.

Read by: LARRY KC4ZOA

While each manufacturer’s design is proprietary, most AFCIs detect arcs by monitoring the shape of the alternating current waveform, changes in current levels, voltage irregularities, and the presence of high frequency emissions or “noise.” The ARRL Lab dug into the problem.“Last summer we built a test fixture in which we could test any type of circuit breaker,” Gruber said. It involved using W1AW as an RF source. Gruber says he bought one of “every AFCI that I could get my hands on,” but when the Lab began testing them during W1AW transmissions, none of the devices tripped.A ham in New Mexico who had reported AFCI problems sent some of his breakers to the ARRL Lab, “and those tripped when we tested them,” Gruber said. The problematic breakers were certain models made by Eaton Corporation. “We already had an Eaton breaker, an older model, but it did not trip,” he noted, adding that the breaker had a yellow button. The newer model, which had a white button, did trip in the presence of RF, however, even at power levels down to about 50 W on 17 meters.

Read by: RANDY KJ4TFU

Gruber contacted Eaton, and two of the manufacturer’s engineers visited ARRL Headquarter in August. “Eaton was extremely cooperative and eager to resolve this,” Gruber recounted. “They spent the day with us, going over our test methods and took some of the problematic breakers back with them, eventually developing a modified version.“We have just finished testing the new version of the breaker, and it did not trip during W1AW transmissions and in other tests,” Gruber reported. He said the new breaker is still in the queue for UL approval.Eaton Engineering Director Andy Foerster said arc fault detection is challenging, in part because so many common household devices — such as vacuum cleaners and power tools that use motors with brushes — create arcing. In information provided to ARRL Eaton engineer Lanson Relyea said that because AFCIs rely on HF emission detection to verify arcing, “any signal that conducts or radiates a signal within the detection band of the AFCI can cause interference and cause the device to trip without the presence of a true arcing condition.”Foerster explained that all arc fault devices must meet the requirements of UL standard 1699. “This standard requires a very extensive set of tests to confirm that the device will detect an arc, that it will not nuisance trip in the presence of a set of common loading conditions, and that it will resist a variety of environmental noise sources,” Foerster told ARRL.

Read by: RICK N9GRW

Among this last set of noise sources is radiated electromagnetic field immunity and immunity to conducted disturbances.”Foerster said AFCIs use “some pretty sophisticated digital signal processing technology” to distinguish various types of arcs. “They continue to get better, but they are not perfect,” he added. “And the governing philosophy is that they should err on the side of tripping.” According to Foerster and National Fire Protection Association (NFPA) statistics, the use of AFCIs appears to have contributed to an overall decrease in house fires from electrical causes. When the National Electrical Code (NEC) begins to specify AFCI receptacles next year, Foerster assured, these will include “the immunity to ham radio RFI that we have developed with the testing assistance of the ARRL.”Eaton and ARRL agreed that when the manufacturer comes out with any new models of breakers, it will ask the League to test them at W1AW. “It’s a win-win situation,” Gruber said. Eaton also has agreed to work with anyone having a problem with RF tripping its AFCIs. Eaton says that AFCI manufacturers “are aware of this compatibility issue and are actively working to correct this in future products.”Eaton’s Relyea said that hams experiencing unwanted tripping problems with their or their neighbors’ AFCIs should contact the manufacturer as the first step in rectifying the compatibility issue. In the case of Eaton breakers, contact Bob Handick (412-893-3746) or Joe Fello (412-893-3745).

Ham Radio in Space: First High School Satellite Among November Ham Satellite Bonanza

Read by:JERRY KE4ETY

The first high school satellite, TJ3Sat, which launched this week aboard a Minotaur I rocket from Wallops Island, Virginia, was among several satellites carrying Amateur Radio payloads — two with ham radio transponders — scheduled to be put into orbit during November. In addition to the Minotaur I launch, other satellitesare set to go into space early November 21 (UTC) aboard a Dnepr rocket from Russia, while still others were scheduled to be deployed from the International Space Station. The Minotaur I carried 29 satellites in all.The TJ3Sat CubeSat is a joint project between the Thomas Jefferson High School for Science and Technology in Alexandria, Virginia, and industry partners to design and build a CubeSat to inspire interest in aerospace technology as part of NASA’s Educational Launch of NanoSatellites (ELaNa) program.

Read by: ED KE4JWS

The school says the satellite’s main mission is “to provide educational resources to other K-12 education institutions to foster interest in aerospace through the successful design and flight of a CubeSat.”

Perhaps more to the point for high schoolers, the satellite’s Text Speak module will convert text messages into analog voice signals. “Students and other users from around the world can submit text strings to be uploaded to the TJ3Sat website. Approved text strings will be transmitted to the satellite and the resulting voice interpretation will be relayed back to Earth over an Amateur Radio frequency,” the TJ3 website explains. The small satellite also will transmit telemetry. Details are on the TJ3Sat website. The school says the November 20 (UTC) launch culminated 7 years of work by more than four dozen students. According to a Washington Post article, the satellite will broadcast its first message to TJ alumni worldwide: “Go Colonials!”

— Thanks to AMSAT News Service, AMSAT-UK, and NASA

Leave a comment

Filed under Information Net

Leave a Comment

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s